How long does it take to build a PC?

How long does it take to build a PC?

The industry is evolving and changing every second as a result of rising demand. New games and tools are released every day. With all the different nuts and bolts, you might frequently wonder how computers are put together. How long does it take to build a PC and put it together? is one of the frequently asked questions. This is a comprehensive guide that will answer any questions you may have. The intricacy of design and your experience level will determine how long it takes to assemble a PC.


It can take around an hour if you have a general understanding of the gear and equipment you are using. It could take 2–4 hours for PCs with more sophisticated hardware, like gaming PCs. The more sophisticated the technology, the more attention it needs during construction. Here is a simple timetable regarding average PC development times by activity that details how long you can anticipate the process taking for each of the usual processes. Depending on your actual circumstances or timeline, it might resemble one of the following:

  • Customization level
  • The cooling system type you select
  • The cable management strategy you intend to use


Some users believe it would be simple to connect the wires, but that is not the case. Building a PC takes time. Special attention must be paid to installing and configuring the hardware. Preparing yourself with prep time for an hour or two is really important if it’s your first build. Your build time will be reduced if you purchase a case with pre-installed fans and other components. It can take a while to read the instructions and go through the building instructions, but doing so can save you a tonne of time.


Building a PC takes time because there are many different components and each one must be configured correctly. Putting everything in its place is very important, as is arranging it properly. Before mounting the motherboard to your PC case, you’ll normally install the CPU, CPU cooler, RAM, and discs on it. Install the graphics card and power supply. Recheck that all cables are attached properly. Since the GPU is large and complex, you need to install the cooling fans and other parts first.


It’s not too difficult to install case fans, CPU fans, and all-in-one closed-loop liquid CPU coolers. That should take about thirty minutes. On the other hand, cooling water requires time because it can significantly lengthen the build time. That’s only because water cooling is frequently made to order, has numerous functional components, and necessitates extensive testing. You don’t want any water to stray and get on your new parts. Expect the cooling of the water to take up to two hours.


To keep your cables organized, run them through the computer casing and secure them with screws. Allow at least an hour for the cables to be properly secured. During this time, make sure your motherboard and power supply are securely linked. Some people like to take their time and use wire ties to make everything look absolutely perfect. Others simply make sure the cords are hidden and out of sight before calling it a day. Even if you stick to the basics, it will take at least 40 minutes.


The real test begins after everything is installed and your monitor, OS, and driver installation are set up, which should only take a few minutes. If your computer hasn’t already thrown its first killing blow, the BIOS should show up. The process of installing the Windows operating system used to take almost 15 years, and during that time you could watch movies with friends. Windows installation now takes a total of 15 minutes. The installation of all the required drivers for your individual components can take up to another hour.


There’s always a potential that something will simply not fit, requiring you to reorder additional parts. Troubleshooting and missing components can further extend build times. On top of that, troubleshooting is a very new issue. Sometimes it’s unclear where certain items should go, you’re lacking a tool, or something minor but subtle is wrong and you don’t know what it is. It can take a long time to simply figure out the problem, perhaps even an entire day or longer in the worst instance.


It can be frightening to turn on your PC for the first time, but the real test occurs when you verify that everything is operating as it should. Your PC will generally let you know quite quickly if something is seriously wrong. Ideally, you should still check that your RAM, GPU, and CPU are in good working order. However, this step is not necessarily required. This process could take up to a half-day, depending on how meticulous you are.


In the end, this article is all about “How long does it take to build a PC?” and will help you a lot in understanding that a skilled PC builder should be able to assemble a system in less than an hour on average. But if this is your first time, you would need to budget anything from 3 to 6 hours. If you encounter any issues or make any mistakes, it can take much longer.

Overall, it’s always advisable to allow yourself some wiggle room so that you do not hasten the process if you are unsure of how much time you should set aside for building a PC. In the end, impatience could come back to haunt you in the form of undesirable problems that call for disassembling and reassembling the parts. This can occur right away or in the future. Many people appreciate the assembly procedure because it only needs to be done once and will endure for years.

Arslan Ashraf
Arslan Ashraf is a tech enthusiast and an experienced technical writer at GamingDairy. He has been writing all types of guides, tutorials, and tips for gamers, developers, and other people who use computers. His way of writing is quite unique: he starts with testing every single piece of Hardware and does a long list of experiments before writing the actual masterpiece. Well, if you have any queries, ensure to connect with him!